A90 Party Bluetooth Speaker

VIDEOS
MIFA_A90 Party Bluetooth Speaker_Product Operation Guide V1.0
Product Support

All

一、Firmware upgrading steps
1、Install the upgrading tools to the computer.
2、Open firmware upgrading window, click auto-restart and choose the new  .FW firmware file.
3、Start to upgrade, take out the speaker and data cable.
4、The speaker will enter the upgrading mode while you holding and pressing “Play” button and in power-off status. 
(Only use for WildCamping upgrade versions, you can press and hold "V+、Play、V-" button at the same time to enter the upgrading status for old versions.
5、Use the data cable to connect to the computer and release your hands unless 1pc ADFU devices is displayed in the upgrading window.
6、Click the upgrading button on the upgrading window to upgrade the firmware.
7、After successfully upgraded, 100% will be showed on the status.

二、Check the firmware version of the speaker
1、Turn on the speaker
2、Short press the M button for 3 times and then short press the Play button for 3 times.  
The speaker will then broadcast the firmware version and then you can update the firmware version as your demand.

一、Firmware upgrading steps
1.Install the upgrading tools to the computer.
2.Open firmware upgrading window, click auto-restart and choose the new .FW firmware file.
3.Start to upgrade, take out the speaker and data cable.
4.The speaker will enter the upgrading mode while you holding and pressing “V+、Play、V-”button at the same time and in power-off status. 
5.Use the data cable to connect to the computer and release your hands unless 1pc ADFU devices is displayed in the upgrading window.
6.Click the upgrading button on the upgrading window to upgrade the firmware.
7.After successfully upgraded, 100% will be showed on the status.

二、Check the firmware version of the speaker
1.Turn on the speaker
2.Short press the M button for 3 times and then short press the Play button for 3 times.  
The speaker will then broadcast the firmware version and then you can update the firmware version as your demand.

一,Firmware upgrading steps
1.Install the upgrading tools to the computer.
2.Open firmware upgrading window, click auto-restart and choose the new .FW firmware file.
3.Start to upgrade, take out the speaker and data cable.
4.The speaker will enter the upgrading mode while you holding and pressing “V+、V- " button at the same time and in power-off status. 
5.Use the data cable to connect to the computer and release your hands unless 1pc ADFU devices is displayed in the upgrading window.
6.Click the upgrading button on the upgrading window to upgrade the firmware.
7.After successfully upgraded, 100% will be showed on the status.

二、Check the firmware version of the speaker
1.Turn on the speaker
2.Short press the M button for 3 times and then short press the Play button for 3 times.  
The speaker will then broadcast the firmware version and then you can update the firmware version as your demand.

Firmware Upgrading Tool only use for MIFA_WildCamping \ WildBox \ WildRod

1、Connect one speaker via Bluetooth and then play music , short press “Link” button to enter Party Add mode, then it becomes the master speaker.
2、Power on other speakers (do not play music) and short press “Link” button, then it will auto-connect the master speaker and play music, then it becomes the slave speakers. You can add more speakers to Party Add mode with the same operation.
3、After connected successfully, the master speaker can control the volume, light, previous/next tracks of all the speakers, the slave speaker can only control the light, volume of themselves.

Tips: If the connection is failed, press and hold the M button for 5 seconds to clear the Bluetooth paired list in case there are some other smart device is connected. Short press “Link” button to enter Party Add mode.

1、Plug in the MicroSD card, turn on the speaker and pause the music, connect to computer with a data cable, then you can copy the music into the MicroSD card.

 

1、Press and hold the power button for 8 seconds to reset, short press the power button again to wake the speaker up.

A, Press and hold the M button for 2 seconds to enter the Bluetooth mode, then the speaker is available.
B, If the speaker is connected to multiple phones before, but the Bluetooth cannot find it when you change a new phone? Long press the M button for 5 seconds to clear the pairing list, and the speaker is available for searching now.
C, The distance is over 10 meters between the speaker and the smart phone.

Tips:  The speaker will auto-connect the last paired 2pcs smart phones as it has memory, it will connect automatically once the speaker turns on and the Bluetooth is on.